Unihertz Titan Loudspeaker Assembly Tutorial

This tutorial will go through the process of replacing the loudspeaker of Unihertz Titan smartphone.

It is important that you read the entire guide and make sure you can complete all the steps before you start to replace loudspeaker of your Unihertz Titan smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.

How to Replace the Speaker Assembly for Unihertz Titan Tutorial

How to Replace the Speaker Assembly for Unihertz Titan Step by Step

	Step 1 Remove the three screws from the right edge bezel, remove the right edge bezel(Be careful not to drop the buttons)
	Step 2 Remove the three screws from the left edge bezel, remove the SIM card tray, and remove the left edge bezel(Be careful not to drop the buttons)
	Step 3 Remove the six screws on the right side of the device body
	Step 4 Remove the six screws on the left side of the device body
	Step 5 Remove the four screws that fix the rear panel
	Step 6 Remove the rear panel gently
	Step 7 Find the speaker assembly
	Step 8 Remove the four screws that fix the speaker assembly
	Step 9 Remove the speaker assembly gently
	Step 10 Remove the new speaker assembly for replacement from the bag
	Step 11 Note: Please use tweezers to remove the vibrator from the original speaker assembly and install it on the replacement speaker assembly
	Step 12 Install the new speaker assembly to the rear panel
	Step 13 Tighten the four screws used to fix the speaker assembly
	Step 14 Install the rear panel, then tighten the twelve screws on both sides of the device body
	Step 15 Install both the edge bezels and tighten the six screws used to fix them
	Step 16 Install the SIM card tray

Step 1 Remove the three screws from the right edge bezel, remove the right edge bezel (Be careful not to drop the buttons)

Step 2 Remove the three screws from the left edge bezel, remove the SIM card tray, and remove the left edge bezel(Be careful not to drop the buttons)

Step 3 Remove the six screws on the right side of the device body

Step 4 Remove the six screws on the left side of the device body

Step 5 Remove the four screws that fix the rear panel

Step 6 Remove the rear panel gently

Step 7 Find the speaker assembly

Step 8 Remove the four screws that fix the speaker assembly

Step 9 Remove the speaker assembly gently

Step 10 Remove the new speaker assembly for replacement from the bag

Step 11 Note: Please use tweezers to remove the vibrator from the original speaker assembly and install it on the replacement speaker assembly

Step 12 Install the new speaker assembly to the rear panel

Step 13 Tighten the four screws used to fix the speaker assembly

Step 14 Install the rear panel, then tighten the twelve screws on both sides of the device body

Step 15 Install both the edge bezels and tighten the six screws used to fix them

Step 16 Install the SIM card tray