This tutorial will go through the process of replacing the Battery of Unihertz Titan Slim Smartphone.
It is important that you read the entire guide and make sure you can complete all the steps before you start to replace the Battery of your Unihertz Titan Slim smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.
How to Replace the Battery of Unihertz Titan Slim
How to Replace the Battery of Unihertz Titan Slim Step by Step
 |
Step 01Place the back cover of the phone on a heating platform or use a heat gun to apply heat along the edges of the back cover. |
 |
Step 02Once the adhesive on the back cover softens, use a suction cup tool and a pry bar to open the back cover (be careful not to damage the glass on the back cover). |
 |
Step 03Remove the back cover and clean off any remaining adhesive. |
 |
Step 04Remove the 11 screws on the antenna bracket. |
 |
Step 05Remove the antenna bracket in order from left to right. |
 |
Step 06Disconnect the two cable connectors. |
 |
Step 07Slowly and steadily pull out the two sections of adhesive tape for the battery. |
 |
Step 08Take out the old battery. |
 |
Step 09Take the new battery and remove the protective film from the adhesive tape. |
 |
Step 10Align the battery in position and install it. |
 |
Step 11Connect the two cable connectors. |
 |
Step 12Install the antenna bracket from right to left. |
 |
Step 13Install the 10 screws in order from right to left. |
 |
Step 14Apply new adhesive tape to the back cover, place the back cover in position, and press it down firmly for a while. |
