Unihertz Titan Pocket Back Cover Replacement Tutorial

This tutorial will go through the process of replacing the Back Cover of Unihertz Titan Pocket Smartphone.

It is important that you read the entire guide and make sure you can complete all the steps before you start to replace the Back Cover of your Unihertz Titan Pocket smartphone. Otherwise, finding a local trained repair specialist to conduct the repair is recommended.

How to Replace the Back Cover of Unihertz Titan Pocket

How to Replace the Back Cover of Unihertz Titan Pocket Step by Step

	Step 01 Remove the 4 screws on the back cover.
	Step 02 Take off the back cover.
	Step 03 Use a pry bar to prop up the reserved position hole for the camera, then pry open the camera protective glass.
	Step 04 Clean off the remaining adhesive on the camera protective glass.
	Step 05 Stick the camera protective glass onto the new back cover (which already has adhesive pre-applied).
	Step 06 Install the back cover. Tighten the 4 screws on the back cover.